Jade Romanesque
What Jade Romanesque Actually Looks Like
Jade Romanesque is a dark, dusty olive green that reads more like a sophisticated earth tone than anything bright or botanical. The name suggests jade, but this is not the vivid gemstone green you might picture. It sits firmly in the deep, muted range, where green, gray, and a whisper of brown all compete for attention depending on the light in the room. In bright natural light it shows its green more clearly. In low or artificial light it can read almost like a dark khaki or even a near-neutral.
Jade Romanesque Undertones
The RGB values tell the story here: red 97, green 100, blue 79. Green leads by the thinnest margin over red, with blue pulling back considerably. That tight gap between red and green is what gives this color its earthy, muted quality rather than a clean leafy green. Expect warm olive and gray undertones to surface depending on your light source and surrounding finishes. Cool white trim can coax out the green. Warm wood tones and amber light will pull the brown and khaki forward.
Where Jade Romanesque Works Best
Jade Romanesque is best suited to spaces where you want depth and a sense of enclosure. Think of it as a color that makes a room feel intentional and grounded rather than airy. It works well on all four walls of a study, library, or dining room where low LRV colors are assets. It can also work as a strong accent wall in a living room or bedroom, giving one surface real visual weight without competing colors fighting back. Because it is this dark, it is a harder sell in small windowless rooms where you need reflected light.
Where to put Jade Romanesque
Deep olive greens have a long history in dining rooms because they recede at night and make candlelight and warm bulbs look rich. Jade Romanesque does the same work. Use it on all four walls with natural wood furniture and aged brass or bronze hardware to let the earthy undertones lead.
This is a natural fit. The low LRV and muted tone create a focused, cocooning atmosphere that suits a room full of books and built-ins. Pair it with warm off-white or cream trim to keep the woodwork from disappearing into the walls.
On all four walls it will make a bedroom feel deeply restful. Keep bedding in natural linens, warm whites, or rust tones so the room does not go too cool or too heavy. Avoid bright white bedding, which can create too much contrast and make the walls feel oppressive.
If you want to test Jade Romanesque before committing to a full room, a single fireplace wall or headboard wall is a smart approach. The color has enough depth to hold its own as a single statement surface without needing the full envelope.
What to Pair With Jade Romanesque
No coordinating colors are listed in our database for Jade Romanesque 476 at this time. General pairing guidance follows based on the color's established character.
You Might Also Like
Colors that clash with Jade Romanesque
Cool gray trim pulls against the warm olive and brown undertones in Jade Romanesque, creating a disconnect that makes both colors look slightly off rather than intentional.
A stark, bright white ceiling above such a dark wall can feel jarring and draws the eye upward in a way that disrupts the cocooning quality that makes this color worth using.
Polished chrome and brushed nickel read cold against the earthy warmth that surfaces in this color, and the combination can feel unresolved.
Common questions
The Benjamin Moore color code is 476. The precise LRV is 13.65, which places it firmly in the dark range. Hex and RGB values are shown in the color spec above.
It can be. With an LRV of 13.65 it reflects very little light, so a windowless or north-facing room with limited natural light may feel cave-like. If you love the color and have a small room, consider using it on three walls or a single accent surface rather than all four, and make sure you have layered warm artificial lighting.
For walls, an eggshell finish gives the color enough sheen to catch light without turning the surface into a mirror. In dining rooms or rooms you want to feel more dramatic, a satin finish is a reasonable step up. Flat or matte will make it feel softer and more velvety, which suits libraries and bedrooms well.
Benjamin Moore lists it as available in both interior and exterior formulas. As an exterior color it reads as a deep, historic olive green, which suits craftsman, colonial, or cottage-style homes well. Pair it with warm white or cream trim and natural wood or black accents for a grounded, cohesive exterior.