Yukon Green
What Yukon Green Actually Looks Like
Yukon Green is a very deep, moody teal-green that reads almost like a forest at dusk. It sits at the dark end of the green-blue spectrum, close to the point where green and teal converge without fully committing to either. In most rooms it will feel genuinely dark and enveloping rather than merely saturated.
Yukon Green Undertones
The hex lands between green and blue, so the color carries both at once. In warm incandescent light it can lean slightly more green and feel a touch earthy. In cool north-facing light or on overcast days it pulls bluer and colder, reading closer to a deep slate-teal. Because the LRV is so low, the undertone shift may be less noticeable than the overall depth of the color.
Where Yukon Green Works Best
A color this dark earns its place as an accent wall, in a library, a home office, a dining room, or any space where you want the walls to recede and the room's contents to stand forward. It works on exterior doors and shutters, where deep tones read as intentional and well-grounded. It can cover all four walls in a small room if you lean into the cocooning effect rather than fight it. It is not well suited to a room where you need the paint to contribute brightness.
Where to put Yukon Green
The depth of Yukon Green makes a home office feel focused and contained. Keep desk lighting warm and bright so the room does not feel cave-like during long working hours.
On all four dining room walls, this color creates an intimate atmosphere that works well for evening meals lit by candles or warm pendant lights. Pair it with a natural wood table and brass fixtures.
Dark walls and bookshelves filled with spines are a natural combination. Yukon Green gives a library a grounded, serious quality without relying on the overused near-black approach.
At this LRV, the color holds up well outdoors. On a door or shutters against a light-colored siding, it reads as a strong, considered accent that complements natural stone or brick.
What to Pair With Yukon Green
No coordinating colors are listed in our database for this color at this time. Generally, Yukon Green pairs well with natural wood tones, warm brass or aged bronze hardware, off-white trim, and textiles in cream, rust, or ochre. For trim, a clean warm white keeps things from feeling too heavy.
You Might Also Like
Colors that clash with Yukon Green
Trim in a cool gray or blue-gray pulls the wall color even colder and the combination can feel flat and institutional rather than rich.
Stark cool-white lighting or very bright white cabinetry can make Yukon Green look muddy by comparison, since the contrast is high but the tones work against each other.
At LRV 8.51, this color absorbs a significant amount of light. A room that already lacks natural light will feel very dark with this on the walls.
Common questions
The LRV is 8.51, which is very low. An LRV of 100 is pure white and 0 is pure black, so 8.51 means this color reflects very little light. It will make a room feel smaller and darker, which can be intentional and dramatic or a problem depending on the space and your lighting plan.
Yes, it is available in both interior and exterior lines, so you can use it on walls indoors or on exterior surfaces like doors and shutters.
With a color this dark, a tinted primer is strongly recommended. Ask the paint desk to tint your primer toward the color so you get full, even coverage without requiring an excessive number of coats.
Eggshell is a solid choice for most walls because it is washable without reflecting so much light that it disrupts the moodiness of the color. Matte can deepen the look further but is harder to clean. Avoid flat in high-traffic areas.