Pacific Rim

Benjamin Moore678LRV 19#517B77
LRV19 — dark
In the Room

What Pacific Rim Actually Looks Like

Pacific Rim is a medium-deep teal that sits squarely between blue and green. It reads more muted than a true teal because gray pulls it back from any tropical brightness. In good light it shows its green side clearly. In lower light it can read almost like a dark slate blue. It is not a color that blends into the background.

Undertone Read

Pacific Rim Undertones

The color carries blue and green in roughly equal measure, with a quiet gray thread that keeps it from feeling saturated or beachy. That gray quality is what gives it staying power across different rooms. Depending on your light source, the blue can become more dominant in the evening under warm incandescent bulbs, while natural daylight tends to pull out more of the green.

Where It Works Best

Where Pacific Rim Works Best

Because its LRV sits well below 50, this is a dark color. It absorbs light rather than reflecting it, so it works best in rooms where you want deliberate depth: a dining room, a study, a bedroom, or an accent wall. It can feel heavy in a small windowless space. In a room with generous natural light, it settles into something rich without feeling oppressive.

Room by Room

Where to put Pacific Rim

Dining Room

A dining room is one of the strongest settings for Pacific Rim. The depth of the color concentrates attention inward, which suits a space meant for lingering. Candlelight and warm overhead fixtures will shift it toward a moody blue-green that feels intentional and calm.

Home Office or Study

In a study or library it reads serious without being cold. Floor-to-ceiling bookshelves in natural wood warm it up considerably, and the color provides good visual contrast behind light-spined books or artwork.

Primary Bedroom

Used on all four walls in a bedroom, Pacific Rim creates a genuinely restful cocoon. Pair it with warm white bedding and natural linen to keep it from feeling stark. North-facing bedrooms will push the color bluer, so keep that in mind if you want the green to show.

Accent Wall

If a full room feels like too much commitment, a single accent wall gives you the color's impact without the full enclosure. It works especially well behind a bed or a fireplace where you want a defined focal point.

What to Pair With

What to Pair With Pacific Rim

No coordinating colors are listed in our database for Pacific Rim 678 at this time. As a general pairing guide, it responds well to warm off-whites and creamy neutrals on trim, natural wood tones, aged brass or copper hardware, and textiles in rust, terracotta, or deep navy.

Explore

You Might Also Like

What to Avoid

Colors that clash with Pacific Rim

Cool-toned stark white trim

A bright cool white on trim can make Pacific Rim feel clinical and push its blue side harder than most people intend.

FixUse a warm off-white or a soft cream on trim and millwork to keep the overall palette feeling grounded rather than cold.
Purple or violet accents

The blue in Pacific Rim can start to argue with purple tones in textiles or art, creating an unsettled quality in the room.

FixSteer accent colors toward warm rust, terracotta, warm tan, or deep navy instead. These tones complement the teal without competing with its blue undertone.
Very low-light rooms with no natural light

In a room that relies entirely on artificial light, Pacific Rim can read darker and bluer than you expect from the chip, and the space can feel smaller than it is.

FixAdd warm-temperature light sources and use lighter furnishings to offset the color's light absorption. Consider whether an accent wall rather than a full room treatment is the better call here.
FAQ

Common questions

Pacific Rim has an LRV of 19.11, which places it firmly in the dark range. Colors below 25 absorb significantly more light than they reflect, so expect this one to make a room feel more enclosed and intimate. That is a feature in the right space and a drawback in a small room with limited natural light.

It can work well in a bathroom that has decent light, particularly in a larger or spa-style bath. In a small windowless powder room, the depth of the color can feel overwhelming. If you love the color in a small bath, consider using it on a single wall or below a chair rail, with a lighter tone above.

For walls, eggshell gives you enough sheen to make the color look alive without highlighting imperfections. In higher-humidity rooms like bathrooms, move up to a satin. A flat finish will make the color read a bit softer and more matte, which some people prefer in bedrooms.

Yes, noticeably so. In a north-facing room the blue in the color becomes more dominant and the overall effect is cooler and darker. In a south-facing room with warm natural light, the green comes forward and the color feels more balanced and alive. Test a large sample board in your specific room before committing.

READY WHEN YOU ARE

See Pacific Rim on your home.

Upload photos of your home, choose where to place your colors and see it rendered instantly.

See it on your home →
6,590Brand verified colors
4Popular paint brands
$0Free to use