Crestwood Tan

Benjamin Moore116LRV 61#F0C9A1
LRV61 — mid-range
In the Room

What Crestwood Tan Actually Looks Like

Crestwood Tan 116 is a soft, sandy tan that sits comfortably in the middle of the value scale, neither too light nor too dark. The hex tells the story plainly: red and green channels are strong, blue is restrained, which gives the color a warm, sun-baked quality. Think of dry beach sand in afternoon light, or the inside of a ripe cantaloupe dialed back to a whisper. It reads as a true tan in most settings, grounded enough to feel substantial on a wall but light enough to keep a room from feeling heavy.

Undertone Read

Crestwood Tan Undertones

The RGB breakdown points clearly toward peach and golden undertones. The red channel is high, the green channel is close behind, and blue falls off noticeably. That combination means Crestwood Tan will shift warmer in incandescent light, picking up an almost apricot quality. In cool north-facing rooms with little direct sun, the peachy warmth is still present but more subdued, and the color reads closer to a straightforward sandy beige. Fluorescent lighting tends to flatten it. If your room gets strong warm afternoon light, expect the color to look noticeably richer than it does on the chip.

Where It Works Best

Where Crestwood Tan Works Best

A color at this value and warmth level works well in rooms where you want energy without intensity. Living rooms, dining rooms, and bedrooms with warm or neutral furnishings are natural fits. It can also work in a hallway or entryway where you want a welcoming, sun-warmed feeling without committing to a bold hue. Because it carries enough warmth to feel inviting, it suits social spaces more than utilitarian ones. In a bathroom with cool tile and bright lighting, the undertones can look slightly off, so pair it carefully with your fixed finishes there.

Room by Room

Where to put Crestwood Tan

Living Room

In a living room with a mix of natural and artificial light, Crestwood Tan feels settled and friendly. It works as a backdrop for wood furniture, leather seating, and woven textiles. Keep trim in a warm white to avoid a muddy boundary at the edges.

Dining Room

Candlelight and incandescent fixtures push this color toward a richer, more golden tone at night, which can make a dining room feel genuinely warm and intimate. In daylight the same room will look lighter and more casual, so the space transitions well across meal times.

Bedroom

As a bedroom color, Crestwood Tan is calm without being cold. Pair it with soft linen bedding and natural wood furniture to keep the whole palette cohesive. Avoid cool gray or bright white accents, which tend to fight the peachy undertone.

Entryway or Hallway

In a transitional space with limited natural light, this color holds its warmth well under incandescent or warm LED fixtures. It makes a narrow hall feel a little sunnier without the visual noise of a more saturated color.

What to Pair With

What to Pair With Crestwood Tan

No coordinating colors are specified in our database for Crestwood Tan 116. Generally, colors in this warm sandy tan family pair well with clean whites that carry a hint of warmth, deeper terracotta or rust tones for contrast, soft sage greens, and medium wood tones that echo the golden quality in the tan itself.

Explore

You Might Also Like

What to Avoid

Colors that clash with Crestwood Tan

Cool Gray Furnishings

Blue-leaning or cool gray sofas, rugs, and cabinetry create a direct conflict with the peachy warmth in Crestwood Tan. The two tones pull in opposite directions and the wall color can start to look muddy or faintly orange by comparison.

FixAnchor the room with warm neutrals, natural wood, or earthy greens instead. If you have existing cool gray furniture, test a few paint samples on large boards and live with them for several days before committing.
Bright White Trim

A stark, blue-white trim color will make Crestwood Tan look more orange than it actually is. The contrast is too sharp and pulls the undertones in an unflattering direction.

FixChoose a trim white with a warm or creamy base. The slight warmth in the trim softens the boundary and lets the tan read as intended.
Cool-Toned Tile

In a bathroom with gray or blue-white tile, the peachy undertone in Crestwood Tan can look pinkish and slightly clashing rather than neutral and sandy.

FixReserve this color for rooms where your fixed finishes, such as flooring and countertops, are warm-toned. If cool tile is non-negotiable, test a large sample board on the wall near the tile before deciding.
FAQ

Common questions

The LRV is 60.69, which puts it in the medium-light range. It reflects a good amount of light and will not make a room feel dark, but it is not so light that it reads as a pastel. You get real color on the wall with enough brightness to keep the space open.

Yes, it is available in both the Benjamin Moore and Aura lines, so you can get it in a range of sheens from flat to semi-gloss depending on the room and application.

It can, especially under warm incandescent or warm LED lighting, which reinforces the golden quality of the tan. In a room with no natural light and only cool-toned bulbs, the color can look a bit flat. Warm bulbs are the fix.

Eggshell is the most common choice for living rooms and bedrooms. It gives the color a soft, low-sheen look that photographs well and cleans reasonably easily. Flat works if you want a matte effect but is harder to wipe down. Reserve satin or semi-gloss for trim and cabinetry.

READY WHEN YOU ARE

See Crestwood Tan on your home.

Upload photos of your home, choose where to place your colors and see it rendered instantly.

See it on your home →
6,590Brand verified colors
4Popular paint brands
$0Free to use