At Sea

Benjamin Moore666LRV 71#C4E3DB
LRV71 — mid-range
In the Room

What At Sea Actually Looks Like

At Sea reads as a soft, hazy blue-green from the can, but it behaves differently on the wall. In strong natural light it leans distinctly aqua, with a cool, watery quality that feels calm without being cold. Pull it into a room with warmer finishes or lower light and it can quiet down considerably, reading closer to a muted sage or even a pale gray-green. It sits on the lighter end of the color range, so it never feels heavy, but it has enough color to register clearly as a hue rather than a whisper of tint.

Undertone Read

At Sea Undertones

The undertones here are the interesting and occasionally tricky part. At Sea carries a cool blue-green base, but warmer surrounding elements, think wood tones, warm-toned stone, or cream trim, can pull a subtle gray or even a faint taupe quality out of it. In north-facing rooms with limited daylight it can feel noticeably more muted and gray than you might expect from the swatch. South and west exposures tend to bring the blue-green reading forward and keep it lively. Test it next to your specific flooring, cabinetry, and trim before committing, because the color is genuinely responsive to what surrounds it.

Where It Works Best

Where At Sea Works Best

At Sea is flexible enough to move through a whole home without feeling mismatched from room to room. It works well in bedrooms where a calm, airy palette is the goal. Bathrooms benefit from its water-adjacent tone. Living spaces with good natural light are a strong fit, particularly if you want color without visual weight. On kitchen cabinets it can read fresh and light, though you need to match it carefully with your countertop and backsplash: warm-toned stone can push it toward gray in ways that may or may not suit the look you want. It also holds up as an exterior color and plays well with a range of brick tones, stone facades, and roofing materials.

Room by Room

Where to put At Sea

Bedroom

At Sea earns its name in a bedroom. The blue-green tone is naturally restful, and its light value keeps the room from feeling closed in. Pair it with linen bedding in warm whites or oatmeal tones to keep the palette from going clinical.

Bathroom

Water-toned colors belong in bathrooms, and At Sea delivers that without going full spa-kit. In a bathroom with natural light it reads fresh and clean. In a windowless or low-light bath, expect it to lean grayer, which can still work well if your fixtures and tile are on the cooler side.

Living Room

In a south- or west-facing living room, At Sea stays lively and reads as a genuine blue-green. In a north-facing space it settles into a quieter, more neutral gray-green. Either way it gives the room a relaxed feel. Warm wood furniture and rugs with any amber or rust in them will keep the space from feeling cool.

Kitchen Cabinets

At Sea on cabinets can look clean and current, especially with light countertops and a simple tile backsplash. Watch the warmth of your countertop material closely. A cream or warm beige stone can pull a gray cast out of the color that may feel a bit flat. Cooler whites and light grays in stone tend to let the blue-green read more clearly.

Exterior

At Sea works as an exterior color across a range of architectural styles. It sits in a comfortable range that reads as neither too bold nor too washed out from the street. It complements natural stone, light brick, and most standard roofing colors. In full sun it will lean more blue-green and feel energetic. On a shaded elevation it reads as a softer gray-green.

What to Pair With

What to Pair With At Sea

No coordinating colors are currently listed in our database for At Sea 666. As a general approach, the color pairs well with warm white trim to keep it from feeling cold, with natural wood tones that add warmth without fighting the blue-green base, and with deeper teal or navy accents for a cohesive, tonal look. Soft terracotta or warm brass hardware can also balance the cool base effectively.

Explore

You Might Also Like

What to Avoid

Colors that clash with At Sea

Cool-heavy rooms with no warm anchor

If your floors are gray tile, your trim is a bright white with blue undertones, and your furniture skews cool, At Sea can tip the whole room into a chilly, flat feeling, especially in north light.

FixBring in at least one warm element: a wood floor, a rug with any tan or terracotta in it, or warm-toned hardware. That anchor prevents the color from reading sterile.
Very warm or golden-toned cabinetry

Pairing At Sea walls with heavily orange or honey-toned wood cabinets creates a contrast that neither color wins. The cool blue-green and the warm orange sit opposite on the color wheel and can feel jarring rather than complementary.

FixIf your cabinets are warm-toned, shift At Sea to an accent wall or consider using it on trim and upper walls only, letting the cabinet color anchor the room.
Bright white trim with a stark blue cast

Trim whites that carry a strong blue or violet undertone will amplify the cool side of At Sea and can make the combination feel harsh rather than crisp.

FixChoose a trim white with a neutral or very slightly warm base. That small shift softens the boundary between wall and trim and keeps the palette feeling intentional.
FAQ

Common questions

At Sea has an LRV of 70.71, which places it solidly in the light range. You can use it in moderately sized rooms without worrying about it making the space feel smaller. It reflects a good amount of light while still carrying a clear, readable color.

No, and that is worth planning around. Morning light tends to bring out the blue quality. By afternoon in west-facing rooms it may warm slightly. Under artificial light in the evening, especially with warm-toned bulbs, it can shift toward a more muted gray-green. Sample it on the actual wall and check it at multiple times of day before deciding.

Eggshell is the most common choice for interior walls. It gives you a subtle sheen that helps the color read clearly without being reflective enough to highlight imperfections. Matte works if you want a softer, more receding look and your walls are in good shape. For cabinets or trim, move up to a satin or semi-gloss for durability.

It can work that way. Its shifting undertones mean it will read somewhat differently depending on the exposure of each room, which can actually give a whole-home palette natural variety without requiring you to change colors. Just be consistent with your trim color throughout to tie it together.

READY WHEN YOU ARE

See At Sea on your home.

Upload photos of your home, choose where to place your colors and see it rendered instantly.

See it on your home →
6,590Brand verified colors
4Popular paint brands
$0Free to use